A wireless Bluetooth pressure sensor paired with an INCYT Polaris or Andromeda tracker, monitoring the contents of vessels such as gas bottles, or fertiliser tanks while also reporting where the asset is. Most level monitoring tells you how full something is but not where it is, and most asset tracking tells you where something is but not whether it is worth collecting. This pairing answers both from one device, and because the tracker carries the sensor's readings, the vessel itself needs no connectivity of its own. You can plan deliveries and refills against real levels instead of scheduled rounds or customer phone calls, stop sending trucks to vessels that are still full, and stop customers running dry.
WHAT'S INCLUDED
- 1 x INCYT wireless BLE pressure sensor
- 1 x INCYT tracker: Polaris (LTE-M) or Andromeda (LTE-M + satellite)
- Mounting bracket and adhesive pad
- Zip ties for securing the tracker
- Access to your data on the INCYT platform
HOW IT WORKS
- CONNECTIVITY
INCYT trackers report directly to the INCYT Cockpit over the LTE-M cellular network and do not require an XR Network Base Station. Commissioning takes minutes: scan the device with the INCYT app to initiate it, add it to your dashboard, and mount it using the supplied bracket or adhesive. In the Cockpit you can draw your own geofence boundaries, set your reporting frequency, review location and sensor history for as long as your plan is active, and share data with other users on your INCYT account.
The pressure sensor itself is a Bluetooth device with no SIM of its own. It broadcasts its readings to the paired tracker, and the tracker forwards them to the Cockpit. Two system variants are available: Polaris, which reports over LTE-M, and Andromeda, which reports over LTE-M and falls back to a satellite network where cellular coverage ends. Choose the Andromeda variant where vessels travel beyond coverage, such as remote mine sites, long haulage routes or land-to-sea legs.
- MEASUREMENT
The sensor measures pressure, and what that pressure means depends on the vessel it is fitted to. In a sealed high pressure vessel such as a gas bottle or a pipeline, the pressure of the gas inside is proportional to how much gas remains, so a direct pressure reading converts to contents remaining and a percentage full.
In a vented liquid vessel such as an IBC or a tank, the measurement is hydrostatic: the pressure at the bottom is proportional to the depth of liquid sitting above the sensor, so pressure converts to a level and then, against the vessel profile you have configured, to a volume and a percentage full.
- YOUR DATA & CUSTOM ALARMS
In the Cockpit you can see current fill level and location together for every monitored vessel, and review how each has changed over time. Low level alarms tell you a vessel is approaching empty and needs scheduling for refill or collection. Geofence alarms report when a vessel enters or leaves a site, which pairs naturally with the level data: a vessel that has arrived somewhere and started dropping is in use, and one that has been full and stationary for weeks is working capital sitting idle.
- INSTALLATION
The pressure sensor is fitted to the vessel's valve or port and paired to the tracker through the INCYT app. The tracker is then mounted to the vessel itself using the supplied bracket, adhesive pad or zip ties, so that level and location always travel together. Once paired, the sensor needs no further configuration.
- ADDITIONAL USE CASES
The same combination suits any mobile or distributed vessel where contents and location both matter: industrial and medical gas cylinder fleets, liquid fertiliser deliveries, bulk chemical IBCs, fuel and lubricant tanks on remote sites, and gas pipeline pressure monitoring. For operators running a delivery fleet, the value is logistics rather than monitoring; knowing which vessels actually need a visit turns a fixed delivery round into a route planned against real demand.